• Factory wholesale 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA

Factory wholesale 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA

Product description

We can normally fulfill our respected consumers with our great excellent, great value and good provider due to we're much more specialist and extra hard-working and do it in cost-effective way for MTP Multi Fiber Female Connectors , MTP Multi Fiber Female Connectors , Fan-out MTP MPO Connector , We welcome shoppers, enterprise associations and buddies from all areas of your environment to speak to us and request cooperation for mutual gains.
Factory wholesale 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA Detail:

Features:

The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts them to 4 output channels of electrical data. 
The central wavelengths of the 4 CWDM channels are 1271nm, 1291nm, 1311nm and 1331nm as members of the CWDM wavelength grid defined in CLR4 MSA. The high-performance uncooled CWDM DFB transmitters and high-sensitivity PIN receivers provide superior performance for High-Performance Computing (HPC) 100-Gigabit Ethernet applications up to 10km links. 

● 4 channels full-duplex transceiver modules
● Based on 100G CLR4 MSA baseline requirement
● Transmission data rate up to 25.78Gbps per channel
● 4 channels DFB-based CWDM uncooled transmitter
● 4 channels PIN ROSA
● Internal CDR circuits on both receiver and transmitter channels
● Non airtight optical engine design
● Qualified under temperature 85°C and humidity 85% @500 hours (the variation of TX ≤ 2.5dBm, RX ≤ 1.5dBm)
● Low power consumption < 3.5W
● Hot-pluggable QSFP28 form-factor
● Up to reach 10km for G.652 SMF
● Duplex LC receptacles
● Operating case temperature range 0°C to +70°C
● 3.3V power supply voltage
● RoHS-6 compliant (lead free)

Application:

● Data Center Interconnect (DCI)
● 100G CLR4 applications
● InfiniBand EDR interconnects
● High-Performance Computing (HPC)
● Enterprise networking


Product detail pictures:

Factory wholesale 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA detail pictures


Related Product Guide:

Usually customer-oriented, and it's our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for Factory wholesale 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA , The product will supply to all over the world, such as: Czech, Cambodia, Las Vegas, The quality of our products is equal to OEM's quality, because our core parts are the same with OEM supplier. The above products have passed professional certification, and we not only can produce OEM-standard products but we also accept Customized Products order.
Write your message here and send it to us

Related Products

More +
  • QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

    QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

  • QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached Cable

    QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached ...

  • MPO MTP Optical Fiber Patchcord

    MPO MTP Optical Fiber Patchcord

  • Fiber Array

    Fiber Array