• OEM/ODM Factory Fiber Optic Transceiver Module - 100G QSFP28 PSM4 2KM – INTCERA

OEM/ODM Factory Fiber Optic Transceiver Module - 100G QSFP28 PSM4 2KM – INTCERA

Product description

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of SFP+ Transceivers , MPO MTP Connector SM , MPO MTP Connector SM , We sincerely welcome both equally international and domestic company associates, and hope to work along with you during the in close proximity to foreseeable future!
OEM/ODM Factory Fiber Optic Transceiver Module - 100G QSFP28 PSM4 2KM – INTCERA Detail:

Features:

This transceiver is a high-performance module for data communication and interconnect applications. It integrates four data lanes in each direction with 100Gbps bandwidth. Each lane can operate at 25.78Gbps up to 2km over G.652 SMF. These modules are designed to operate over singlemode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses an 12-fiber MTP/MPO connector. This module incorporates INTCERA proven circuit and optical technology to provide reliable long life, high performance, and consistent service. 

● 4 channels full-duplex transceiver modules
● Transmission data rate up to 25.78Gbps per channel
● 4 channels 1310nm DFB
● 4 channels PIN photo-detector array
● Internal CDR circuits on both receiver and transmitter channels
● Support CDR bypass
● Low power consumption < 3.5W
● Hot-pluggable QSFP28 form-factor
● Up to 2km reach for G.652 SMF
● Single male MPO (APC 8-degree) connector receptacle
● Operating case temperature range 0°C to +70°C
● 3.3V power supply voltage
● RoHS-6 compliant (lead free)

Application:

● 100G Ethernet links
● InfiniBand DDR/EDR
● Data center and enterprise networking


Product detail pictures:

OEM/ODM Factory Fiber Optic Transceiver Module - 100G QSFP28 PSM4 2KM – INTCERA detail pictures


Related Product Guide:

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, believe in the 1st and management the advanced" for OEM/ODM Factory Fiber Optic Transceiver Module - 100G QSFP28 PSM4 2KM – INTCERA , The product will supply to all over the world, such as: Belgium, Finland, belarus, "Good quality and reasonable price" are our business principles. If you are interested in our products or have any questions, please feel free to contact us. We hope to establish cooperative relationships with you in the near future.
Write your message here and send it to us

Related Products

More +
  • QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

    QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

  • QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached Cable

    QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached ...

  • MPO MTP Optical Fiber Patchcord

    MPO MTP Optical Fiber Patchcord

  • Fiber Array

    Fiber Array