• Original Factory Fiber Optic F-M Attenuator - 100G QSFP28 PSM4 2KM – INTCERA

Original Factory Fiber Optic F-M Attenuator - 100G QSFP28 PSM4 2KM – INTCERA

Product description

Sticking towards the theory of "Super Good quality, Satisfactory service" ,We are striving to become a superb business enterprise partner of you for Optical Fiber SM connector , MPO MTP Connector OM4 , Fiber Optic Adaptor Fast Connector , Sincerely hope to build long term business relationships with you and we will do our best service for you.
Original Factory Fiber Optic F-M Attenuator - 100G QSFP28 PSM4 2KM – INTCERA Detail:

Features:

This transceiver is a high-performance module for data communication and interconnect applications. It integrates four data lanes in each direction with 100Gbps bandwidth. Each lane can operate at 25.78Gbps up to 2km over G.652 SMF. These modules are designed to operate over singlemode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses an 12-fiber MTP/MPO connector. This module incorporates INTCERA proven circuit and optical technology to provide reliable long life, high performance, and consistent service. 

● 4 channels full-duplex transceiver modules
● Transmission data rate up to 25.78Gbps per channel
● 4 channels 1310nm DFB
● 4 channels PIN photo-detector array
● Internal CDR circuits on both receiver and transmitter channels
● Support CDR bypass
● Low power consumption < 3.5W
● Hot-pluggable QSFP28 form-factor
● Up to 2km reach for G.652 SMF
● Single male MPO (APC 8-degree) connector receptacle
● Operating case temperature range 0°C to +70°C
● 3.3V power supply voltage
● RoHS-6 compliant (lead free)

Application:

● 100G Ethernet links
● InfiniBand DDR/EDR
● Data center and enterprise networking


Product detail pictures:

Original Factory Fiber Optic F-M Attenuator - 100G QSFP28 PSM4 2KM – INTCERA detail pictures


Related Product Guide:

The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for Original Factory Fiber Optic F-M Attenuator - 100G QSFP28 PSM4 2KM – INTCERA , The product will supply to all over the world, such as: Egypt, Montreal, Denmark, "Good quality and reasonable price" are our business principles. If you are interested in our products or have any questions, please feel free to contact us. We hope to establish cooperative relationships with you in the near future.
Write your message here and send it to us

Related Products

More +
  • QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

    QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

  • QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached Cable

    QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached ...

  • MPO MTP Optical Fiber Patchcord

    MPO MTP Optical Fiber Patchcord

  • Fiber Array

    Fiber Array